The panel screws are designed to use a minimum of parts, eliminating the risk of hardware loosening that could come off and damage the internal components. These panel screw sets
Pieces are ideal for connecting metal panels or other thin material components to provide the required application interfaces.
PFHV
1. Low-cost panel screw design, low-cost panel screw instead of separate fasteners.
2. Small, compact design, to meet the limited installation space requirements.
3. Two screw lengths.
General purpose slot/Standard Cross slot
Panel screws, also known as spring screws, can be used to install the balance of PCB board or iron plate, only take up a small space. Pressed into the housing or sheet hole, the line into an exposed spring screw, because it is fixed with a spring, the screw relative to the other end of the sheet to come and go, can free screw screw in and screw out screw, and the whole piece can be firmly embedded in the panel does not leave the panel, it is also referred to as not out of the screw. The outer ring ring is generally pressed with straight knurled teeth, in order to facilitate the hand screw, it is also known as the hand-tight screw or take-in screw. The scheme solves the problem that the screw needs to be removed frequently, and is very practical and convenient.
