Flare-in Nut is a kind of fastener applied to sheet metal/sheet/chassis/cabinet. Flare-in Nut has two shapes: one is hexagonal, denoted by NZ NZS, and the other is round, denoted by Z ZS.
Flare-in Nut is a kind of fastener applied to sheet metal/sheet/chassis/cabinet. Flare-in Nut has two shapes: one is hexagonal, denoted by NZ NZS, and the other is round, denoted by Z ZS.
Generally, the thin plate pre-opened good plate hole will raise the flare-in nut into the hole, with the fixture will be part of the non-internal teeth from the inside to the outside of the rise, so that the rise flare-in nut and the thin plate closely riveted. Rising flare-in nut generally does not stiffen, thus ensuring its toughness, with the jig when rising, both can make the component up riveting tight, and not to the component up the crack. Therefore, the choice of good material is very important. The flare-in nut is riveted on the sheet to form an effectively fixed internal thread on the sheet.
Flare-in nuts from the material into fast-pin steel Flare nuts Z/NZ type, stainless steel rivet ZS /NZS two types, respectively, are applied to different environments. According to the customer plate thickness, determine the model.
Round and hexagonal flare-in nuts are widely used in metal plates, control boxes, and power cabinet products such as wall panels of the inlay process. Its structural particularity, assembly, only the rivet nut into the metal plate hole, to“Rivet” operation.
Opening Hours:
Monday – Friday 8am – 18pm
Email: info@mdfastener.com
Address: 116th, Sanxing Road, Donggaun City, Guangdong Province, China
We will contact you within 4 hours, please pay attention to the email with the suffix “@mdfastener.com”.